Mid/Side guide
Look closer at the stereo image.
Mid/Side analysis helps you inspect what the stereo channels share and how they differ. It gives you useful clues. Listening to the mono sum tells you what those clues mean for the mix.
Mid is the sum. Side is the difference.
Meters derives Mid as (L+R)/2 and Side as (L-R)/2. If the left and right channels are identical, Side approaches silence. Opposing versions of the same signal can cancel in Mid while remaining in Side.
Off-center panning can create Side energy as well as differences between the recorded channels. A large Side trace is not a width score, and it doesn’t identify a problem on its own. Compare the same passage and listen to the sound in context.
Start with a familiar source
Route a mono source equally to a stereo bus, insert Meters and choose M/S. You should see the shared content in Mid, with little or no Side. Then inspect an element that you know contains a stereo effect. Look at the frequency range where the Side trace changes.
Use the hover crosshair to inspect frequency and display level. Freeze can hold a moment while you look. Keep the display slope and smoothing consistent when comparing settings, so a visual-control change doesn’t look like an audio change.
Read correlation as a clue
Correlation near +1 means the channels are moving together over the measurement interval. Values near -1 indicate opposing channel behavior. Values around 0 show little linear relationship during that interval. Silence or too little usable signal can leave correlation undefined.
A negative reading deserves a listen, especially if it persists. Reverb and deliberate stereo effects can produce changing readings, so don’t correct every dip automatically. Watch a representative passage rather than judging the mix from a single instant.
Check the mono sum with your DAW
In Meters, Stereo and M/S are graph modes. They never switch the audio into mono or solo the Side channel. Use your DAW’s mono control, or Utility’s Mono switch, when you want to hear the sum.
Listen for important elements losing level or changing tone. A Side-heavy bass part may be intentional, but the mono result still needs to suit the delivery. The spectrum helps you locate the affected range; it does not certify mono compatibility.
Questions before you choose
Does choosing M/S in Meters change what I hear?
No. It changes the graph only. The stereo input passes through unchanged.
Is Side just the audio panned to the edges?
No. Side is derived from the difference between Left and Right. Unequal channel levels can create Side energy, as can other stereo differences.
Is negative correlation always a mistake?
No. Judge the sound and the mono result in context. Sustained opposing channel behavior can cause important cancellation in a mono sum.
Why can correlation show dashes?
Correlation needs usable energy in both channels. Silence or insufficient signal can leave the reading unavailable.
Put Meters to work
Signup includes Cuekeeping plugin news, updates and offers. Complete free checkout to add the installers to your account. The plugin works offline without activation.
Related reading
Published by Cuekeeping. Product facts checked against the linked official sources on November 5, 2026.