Series vs. parallel effects
In a series chain, each effect processes the output of the effect before it. In parallel, the source splits into separate paths that meet again at the output. The route changes what each effect receives, even when its controls stay in the same place.

Start with 1 path.
In GoldenFX, clear the patchbay and connect a path from the input through Filter, then Distortion, then the output. Clear Patching removes the cables and keeps the module controls. Set each module for Insert use when you want its Mix control to blend the signal passing through it.
Keep the distortion modest at first. Change the filter, then listen to how that changes the signal driving the distortion. Reverse their order and compare the same phrase. Filtering before drive changes what excites the distortion; filtering afterward shapes the result.
Split the source when the dry part needs room.
GoldenFX's INIT is a parallel starting point. A separate delay or reverb path can add space while another path carries the body of the sound. Start with 1 effect path, then add the next. Check the output level as paths meet.
Parallel paths can make the result louder, and differently processed copies can change the tone when combined. Listen in the mix and check mono before deciding that a wider or louder version works better.
Put the delay before the reverb.
Connect a Tape delay into Reverb when you want the repeats to excite the room or plate. That is different from sending the original sound separately to delay and reverb. Use a short repeated phrase so the tail is easy to hear after playback stops.
GoldenFX gives you 2 Tape delays with independent Mix, Feedback and Tone controls. Keep the first route simple before adding the second. Feedback inside a delay is supported; cable feedback loops between modules aren't.
Compare without the level jump.
Use the same source, trim the output and compare at a similar listening level. Save a user preset when a route fits the cue. A serial chain isn't automatically more focused, and a parallel chain isn't automatically wider. Listen to what changed.
Read about Insert and Return behavior, or open GoldenFX's free trial to try both routes.