Reference / Guide

How to loudness-match reference tracks

A louder track can pull your attention before you hear the balance. Start a reference comparison by bringing the listening levels close, then compare the same passage.

Choose the passage before matching

Load your own reference into Cuekeeping Reference and line up the part you want to hear. Reference follows your DAW transport. Use Offset when reference time 0 needs to begin later on the DAW timeline.

Compare a chorus with a chorus, or a quiet section with a similar part. Different arrangements can explain a difference in loudness or bass energy. A match doesn't make those arrangements equivalent.

Let the reference follow your mix

Play the passage for at least 3 seconds, then click Match. The default adjusts the selected reference toward your mix's rolling loudness. Your mix stays unchanged. Reference scans the loaded file's true peak and limits automatic gain to preserve headroom.

If the status reports a headroom limit, the reference can't reach the requested level within that ceiling. Turn on Safe comparison and press Match again to permit shared listening attenuation. This changes what you hear, including your mix's listening level. Clear match restores both gains to 0.

Listen beyond the number

Switch between A and B while the same musical event plays. Check whether the vocal or lead feels buried, whether the low end holds its shape and whether the reference's density comes from the arrangement. Use a frequency band when you need to focus the comparison.

Safe comparison isn't a limiter. It can't predict peaks in live mix audio it hasn't seen. Keep an eye on headroom and listen at a comfortable level.

Return to the intended export

Reference returns the original DAW mix during offline export. A real-time bounce or internal resampling captures the listening path instead. Before either method, select A, Full and Stereo, then click Clear match.

Read the Reference quick start or complete manual for meter reset and linked-file behavior.