Reference / Guide

How to compare a mix in Mid/Side

Mid/Side can help you hear why 2 mixes feel different in width. It doesn't tell you which one is better. Compare a matching passage and pay attention to what the arrangement needs to keep in the center.

Keep the graph separate from listening

In Cuekeeping Reference, the analyzer's Mid/Side view changes the spectrum presentation. The Mono and Sides listening controls change the sound. They're independent, so changing the graph doesn't silently change what you're hearing.

Select the mix or reference as the analysis source and inspect its Mid/Side traces. Use the source and channel labels as well as the colors. A curve only describes the selected signal and settings.

Check what survives in mono

Listen in Mono to hear the combined center information. Compare A and B at a similar level. Listen for a lead, bass line or important motif losing its place when the stereo separation disappears.

A quieter result can come from the recorded material or its stereo processing. The meter alone doesn't identify the cause. Return to your mix and check the stages that change its width or timing.

Listen to the sides deliberately

Sides listening focuses on the difference between left and right. Reverb, stereo delays and wide textures can become easier to hear there. Compare the same band on both sources if the width changes mainly in the upper range.

Don't assume the reference's stereo picture is a target for every instrument. A wide pad and a centered lead serve different jobs. Judge the whole arrangement after the isolated check.

Return to stereo

Go back to Stereo and Full when you're finished. For a real-time bounce or internal resampling, select A and click Clear match too. Read how to match listening levels before judging small tonal or width differences.